CHEMICAL
ENGINEERING TRANSACTIONS
- Vol. 33,
2013
Guest Editors: Enrico Zio, Piero Baraldi
Copyright © 2013, AIDIC Servizi S.r.l.,
ISBN 978-88-95608-24-2;
ISSN 1974-9791
|
Table
of Contents & Authors Index
|
DOI
|
Content |
|
Part 1 |
|
Degradation Modeling |
|
| Research on Modeling Method for Constraint Inference | 1 |
| Zhao Q., Yang K., Feng W. | DOI:10.3303/CET1333001 |
| Degradation Modeling Using Stochastic Filtering for Systems Under Imperfect Maintenance | 7 |
| Zhang M., Xie M. | DOI:10.3303/CET1333002 |
| Study on Parameter Drift Mechanism of a Quartz Accelerometer with a System Analysis Method | 13 |
| Chen Y., Liu B., Kang R., Hou Z. | DOI:10.3303/CET1333003 |
| Relationship Between Delay Time and Gamma Process Models | 19 |
| Jiang R. | DOI:10.3303/CET1333004 |
Data and Signal Processing |
|
| Investigation on the Rls and Kalman Based Adaptive Order Tracking Techniques for Rotating Machinery Analysis | 25 |
| Veljkovic D., Macuzic I., Jeremic B., Mijovic P., Todorovic P. | DOI:10.3303/CET1333005 |
| Multi-sensor Degradation Data Analysis | 31 |
| Hua D., Al-Khalifa K., Hamouda A.M., Elsayed E.A. | DOI:10.3303/CET1333006 |
| Weak Magnetic Memory Signal Denoising Based on Cascaded Singular Value Decomposition | 37 |
| Yang D., Hu Z., Yang Y., He X. | DOI:10.3303/CET1333007 |
| Numerical Key Performance Indicators for the Validation of Phm Health Indicators with Application to a Hydraulic Actuation System | 43 |
| Lamoureux B., Mechbal N., Masse J.R. | DOI:10.3303/CET1333008 |
| Tuning the Covariate Influence in a Gamma Process Clustering Algorithm | 49 |
| Grall-Maes E., Wang X., Beauseroy P. | DOI:10.3303/CET1333009 |
| Extraction of Gear Fault Feature Based on the Envelope and Time-frequency Image of S Transformation | 55 |
| Liu J.M., Liu Y.H., Cheng J.P., Feng F.Z. | DOI:10.3303/CET1333010 |
| Development of a New Signal Processing Diagnostic Tool for Vibration Signals Acquired in Transient Conditions | 61 |
| Chatterton S., Pennacchi P., Ricci R., Borghesani P., Vania A. | DOI:10.3303/CET1333011 |
| Preprocessing of the Observed Data and the Recognition of the Hidden Signs of Fault | 67 |
| Iakimkin V., Kirillov A., Kirillov S. | DOI:10.3303/CET1333012 |
| Information-theoretic Measures and Sequential Monte Carlo Methods for Detection of Regeneration Phenomena in the Degradation of Energy Storage Devices | 73 |
| Orchard M.E., Lacalle M., Olivares B., Cerda M.A., Silva J. F. | DOI:10.3303/CET1333013 |
| Effect of Multiple Faults and Fault Severity on Gearbox Fault Detection in a Wind Turbine Using Electrical Current Signals | 79 |
| Sreenilayam Raveendran R.K., Azarian M.H., Kim N.H., Pecht M.G. | DOI:10.3303/CET1333014 |
Fault Diagnostics and Prognostics |
|
| Diagnoser with Hybrid Structure for Fault Diagnosis of a Class of Hybrid Dynamic Systems | 85 |
| Louajri H., Sayed-Mouchaweh M., Labarre C. | DOI:10.3303/CET1333015 |
| Framework for a Hybrid Prognostics | 91 |
| Medjaher K., Zerhouni N. | DOI:10.3303/CET1333016 |
| Study on the Application of the Shock Model in Forecasting Residual Life of Cnc System | 97 |
| Yao J., Luo R., Liu Q., Peng C., Jia Y. | DOI:10.3303/CET1333017 |
| An Intelligent Prognostic Method for Ssadt Based on Svm | 103 |
| Sun F., Jiang T., Li X., Fan Y. | DOI:10.3303/CET1333018 |
Data-driven Approaches to PHM |
|
| Maturation of Detection Functions by Performances Benchmark. Application to a Phm Algorithm | 109 |
| Hmad O., Masse J.R., Grall-Maes E., Beauseroy P., Mathevet A. | DOI:10.3303/CET1333019 |
| Strategies to Face Imbalanced and Unlabelled Data in Phm Applications | 115 |
| Gouriveau R., Ramasso E., Zerhouni N. | DOI:10.3303/CET1333020 |
| The Integrated Vehicle Health Management Development Process: Verification and Validation of Simulation Models | 121 |
| Niculita O., Jennions I., Irving P. | DOI:10.3303/CET1333021 |
Bayesian Approaches to PHM |
|
| A Bayesian Framework for Crack Detection in Structural Components Under Dynamic Excitation | 127 |
| Broggi M., Beaurepaire P., Patelli E. | DOI:10.3303/CET1333022 |
| On-line Updating of Dynamic State-space Model for Bayesian Filtering Through Markov Chain Monte Carlo Techniques | 133 |
| Corbetta M., Sbarufatti C., Manes A., Giglio M. | DOI:10.3303/CET1333023 |
| Bayesian Approach for Remaining Useful Life Prediction | 139 |
| Mosallam A., Medjaher K., Zerhouni N. | DOI:10.3303/CET1333024 |
| Fault Diagnosis of Hybrid Systems Using Particle Filter Based Hybrid Estimation Algorithm | 145 |
| Guo J.B., Ji D.F., Du S.H., Zeng S.K., Sun B. | DOI:10.3303/CET1333025 |
| Applications of Bayesian Methods in Detection of Healthcare Frauds | 151 |
| Ekin T., Ieva F., Ruggeri F., Soyer R. | DOI:10.3303/CET1333026 |
Methods of Information Fusion for Diagnostics and Prognostics |
|
| Remaining Useful Life Prediction for Rolling Element Bearing Based on Ensemble Learning | 157 |
| Zhang B., Zhang L., Xu J. | DOI:10.3303/CET1333027 |
| Prognostics Under Different Available Information | 163 |
| Baraldi P., Cadini F., Mangili F., Zio E. | DOI:10.3303/CET1333028 |
| Diversity and Integration of Rotating Machine Health Monitoring Methods | 169 |
| Kanemoto S., Yokotsuka N., Yusa N., Kawabata M. | DOI:10.3303/CET1333029 |
| Damage Identification for Transmission Tower Structure Using Information Fusion Methods | 175 |
| Zhang L., Liu X., Zhang B., Wang J. | DOI:10.3303/CET1333030 |
Uncertainty in PHM |
|
| Quantifying Uncertainty for System Failure Prognostics: Enhanced Approach Based on Interval-valued Probabilities | 181 |
| Krymsky V. | DOI:10.3303/CET1333031 |
| A Cognitive Framework for Analysis and Treatment of Uncertainty in Prognostics | 187 |
| Sun B., Liu T., Liu S., Feng Q. | DOI:10.3303/CET1333032 |
| Risk Analysis Holistic Approach as a Base for Decision Making Under Uncertainties | 193 |
| De La Canal M., Ferraris I. | DOI:10.3303/CET1333033 |
| Reliability Analysis of Pressure Vessels Under Aleatory and Epistemic Uncertainty | 199 |
| Xie C., Wei F., Luo J., Huang H.Z., Liu Y. | DOI:10.3303/CET1333034 |
Design and Integration of PHM Systems |
|
| Methodology and Framework of a Cloud-based Prognostics and Health Management System for Manufacturing Industry | 205 |
| Lee J., Yang S., Lapira E., Kao H.A., Yen N. | DOI:10.3303/CET1333035 |
| The Integrated Heath Monitoring System Design Using the Dynamic Flowgraph Methodology for Thermal Control Systems of Payloads | 211 |
| Shi J., Wang G., Liu Y., Tong T. | DOI:10.3303/CET1333036 |
| Phm Design Based on Cooperative Design | 217 |
| Ma Y., Zhang W. | DOI:10.3303/CET1333037 |
| A Qualitative and Quantitative Functional Modeling Method for Phm System Design | 223 |
| Song L., Liu Y., Hu Z., Yang D., Zhang S. | DOI:10.3303/CET1333038 |
| Rapid Design and Deployment of Phm--a Systematic Approach | 229 |
| Johnson P., Lapira E., Siegel D., Lee J. | DOI:10.3303/CET1333039 |
| Sequential Inspection and Maintenance Policy for Multiple Systems with Wiener Degradation Failure Under Availability Requirement | 235 |
| Huang X.P., Tang Y.Z., Zhou J.L. | DOI:10.3303/CET1333040 |
| I2ms2c – Intelligent Maintenance System Architecture Proposal | 241 |
| Zuccolotto M., Pereira C.E., Hellingrath B., Frazzon E., Espindola D., Henriques R. | DOI:10.3303/CET1333041 |
| Demonstration Method for Phm-oriented Testability Design | 247 |
| Wang C., Qiu J., Liu G., Yang S.M., Yang P. | DOI:10.3303/CET1333042 |
| Test Sequencing Problem Considering Life Cycle Cost Based on the Tests with Non-independent Cost | 253 |
| Hu Z., Zhang S., Yang Y., Song L., Liu Y. | DOI:10.3303/CET1333043 |
| Design of Automatic Line Fault Injection Equipment and Verification of Bit Detection Capability | 259 |
| Lv K., Shi J.Y., Liu H., Lin X.G., Ji C. | DOI:10.3303/CET1333044 |
| Remote Calculating Phm Cluster: the first Results | 265 |
| Kirillov A., Kirillov S., Pecht M.G. | DOI:10.3303/CET1333045 |
| Increasing the Adoption of Prognostic Systems for Health Management in the Power Industry | 271 |
| Catterson V., Costello J., West G., Mcarthur S., Wallace C. | DOI:10.3303/CET1333046 |
| A Review of Current Prognostics and Health Management System Related Standards | 277 |
| Yang Z., Bo J., Wei T. | DOI:10.3303/CET1333047 |
| System Phm Algorithm Maturation | 283 |
| Masse J.R., Hmad O., Beauseroy P., Grall-Maes E., Mathevet A. | DOI:10.3303/CET1333048 |
| Research on Heading Sensitive Drift Behavior of Inertial Platform System Under the Influence of Magnetic Field | 289 |
| Huang X., Chen Y., Kang R. | DOI:10.3303/CET1333049 |
Condition-based and Predictive maintenance |
|
| Predictive Maintenance of Military Systems Based on Physical Failure Models | 295 |
| Tinga T. | DOI:10.3303/CET1333050 |
| Application of Data Driven Methods for Condition Monitoring Maintenance | 301 |
| Marton I., Sanchez A., Carlos S., Martorell S. | DOI:10.3303/CET1333051 |
| Risk Sensitive Particle Filtering in Support of Predictive Maintenance | 307 |
| Compare M., Zio E. | DOI:10.3303/CET1333052 |
| An Application of Immersive Virtual Simulation Technology in Maintenance | 313 |
| Li Y., Lv C., Zhou D., Jia X. | DOI:10.3303/CET1333053 |
| Optimization of the Maintenance Process Using Genetic Algorithms | 319 |
| Nestic S., Djordjevic A., Aleksic A., Macuzic I., Stefanovic M. | DOI:10.3303/CET1333054 |
RUL Assessment and Maintenance Decision Rule |
|
| Residual Useful Life Estimation Based on a Time-dependent Ornstein-uhlenbeck Process | 325 |
| Deng Y., Barros A., Grall A. | DOI:10.3303/CET1333055 |
| Rul Estimation Using an Adaptive Inverse Gaussian Model | 331 |
| Xu W., Wang W. | DOI:10.3303/CET1333056 |
| Multisolution Analysis Time Series Data and Rul Estimate | 337 |
| Khodos A., Kirillov A., Kirillov S. | DOI:10.3303/CET1333057 |
| Accelerated Degradation Test and Particle Filter Based Remaining Useful Life Prediction | 343 |
| Li X., Liu L., He B., Jiang T. | DOI:10.3303/CET1333058 |
| Performance Data Prognostics Based on Relevance Vector Machine and Particle Filer | 349 |
| Hu Y., Luo P. | DOI:10.3303/CET1333059 |
Maintenance Decision Support Systems |
|
| Optimal Selection of Obsolete Tools in Manufacturing Systems Using Cuckoo Optimization Algorithm | 355 |
| Mellal M.A., Adjerid S., Williams E.J. | DOI:10.3303/CET1333060 |
| Exploration of Maintenance and Support Organization Flexibility Analysis Method | 361 |
| Xiao B., Ma S., Guo L., Wang T. | DOI:10.3303/CET1333061 |
| Data Field for Decision Making in Maintenance Optimization: an Opportunity for Energy Saving | 367 |
| Darabnia B., Demichela M. | DOI:10.3303/CET1333062 |
| Testing Strategies of Redundant Safety Instrumented Systems with Dangerous Detected Failures | 373 |
| Liu Y. | DOI:10.3303/CET1333063 |
| Value of Monitoring in Asset Management: a Social Cost-benefit Analysis Approach | 379 |
| Zouch M., Courage W., Napoles O.M. | DOI:10.3303/CET1333064 |
E-Maintenance Engineering, Services
and Technologies for PHM development in Industry |
|
| A Human Centered View on E-maintenance | 385 |
| Oliveira A., Araujo R., Jardine A. | DOI:10.3303/CET1333065 |
| Advances in Phm Application Frameworks: Processing Methods, Prognosis Models, Decision Making | 391 |
| Guillen A., Gomez J., Crespo A., Guerrero Bolanos A., Sola A., Barbera L. | DOI:10.3303/CET1333066 |
| An Intelligent Maintenance System to Improve Safety of Operations of an Electric Furnace in the Steel Making Industry | 397 |
| Colace C., Fumagalli L., Pala S., Macchi M., Matarazzo N.R., Rondi M. | DOI:10.3303/CET1333067 |
| Study on Equipment Health Management System Modeling Based on Dodaf | 403 |
| Wang C., Ma L., Wu Q., Yuan F.C. | DOI:10.3303/CET1333068 |
| Research on Framework of Product Health Management Center Based on Dodaf | 409 |
| Pan X., Yin B., Ma L., Wen T., Xin Z. | DOI:10.3303/CET1333069 |
Maintenance and Human and Organizational Factors |
|
| Research of Evaluation Method for Logistical Personnel Supportability Based on Attribute Hierarchical Model and Grey System | 415 |
| Xiao B., Wang T., Ma L., Lv L. | DOI:10.3303/CET1333070 |
| Human Reliability Test and Identification of Hcr Model Basic Parameters for Single Factor “meta-operation” | 421 |
| Yang Y., Chen S., Zheng W., Kang R. | DOI:10.3303/CET1333071 |
| Human Reliability Analysis of Radiotherapy Procedures Using Bayesian Networks | 427 |
| Gomes É.C., Duarte J.P., Frutuoso E Melo P.F.F. | DOI:10.3303/CET1333072 |
| A Pooled Knowledge Basis on Pressure Equipment Failures to Improve Risk Management in Italy | 433 |
| Bragatto P., Ansaldi S., Delle Site C. | DOI:10.3303/CET1333073 |
| When the Human Factor is at the Core of the Safety Barrier | 439 |
| Leva C., Bermudez Angel C., Plot E., Gattuso M. | DOI:10.3303/CET1333074 |
| Human and Organisational Factors Training as a Risk Management Strategy in an Aviation Maintenance Company | 445 |
| Cromie S., Liston P., Ross D., Corrigan S., Vani L., Lynch D., Demosthenous S., Leva C., Kay A., Demosthenous V. | DOI:10.3303/CET1333075 |
| Human Factor Analysis Embedded in Risk Assessment of Industrial Machines: Effects on the Safety Integrity Level | 451 |
| Demichela M., Pirani R. | DOI:10.3303/CET1333076 |
| The Assessment of Maintenance Process Vulnerabilities in Small and Medium Enterprises | 457 |
| Aleksic A., Djapan M., Tadic D., Stefanovic M. | DOI:10.3303/CET1333077 |
| A New Model for Evaluation of Safety Grade of Indicators Based on a Fuzzy Logic | 463 |
| Djapan M., Tadic D., Macuzic I., Jeremic B., Giagloglou E. | DOI:10.3303/CET1333078 |
Physics of Failure and Reliability Prediction |
|
| Reliability Modelling and Simulation of Complex Systems | 469 |
| Lin Y., Li D., Kang R. | DOI:10.3303/CET1333079 |
| Gear System Time-varying Reliability Analysis Based on Elastomer Dynamics | 475 |
| Ma Z., Zhang J., Sun J., Gao P., Li M. | DOI:10.3303/CET1333080 |
| Package Reliability of Mems Sensors Used in Automotive Under Random Vibration | 481 |
| Liu Y., Sun B., Feng Q. | DOI:10.3303/CET1333081 |
| Iec 61508: Effect of Test Policy on the Probability of Failure on Demand of Safety Instrumented Systems | 487 |
| Contini S., Copelli S., Raboni M., Torretta V., Sala Cattaneo C., Rota R. | DOI:10.3303/CET1333082 |
| A Reliability-based Opportunistic Predictive Maintenance Model for K-out-of-n Deteriorating Systems | 493 |
| Huynh K.T., Barros A., Berenguer C. | DOI:10.3303/CET1333083 |
| Reliability Estimate of Probabilistic-physics-of-failure Degradation Model | 499 |
| Yang Z., Kang R., Elsayed E.A. | DOI:10.3303/CET1333084 |
| The Mechanical Reliability Optimization Based on the Improved Artificial Bee Colony Algorithm | 505 |
| Peng W., Zhang J., Sun J., Gao P., Liu B. | DOI:10.3303/CET1333085 |
| Network Service Reliability Analysis Model | 511 |
| Xin J., Guo L., Huang N., Li R. | DOI:10.3303/CET1333086 |
| Research on the Rework Strategies of Rms Based on Process Reliability | 517 |
| Dai W., An J., Zhao Y. | DOI:10.3303/CET1333087 |
| Parameters Tuning in Support Vector Regression for Reliability Forecasting | 523 |
| Zhao W., Tao T., Zio E. | DOI:10.3303/CET1333088 |
| Dynamic Reliability by Using Simulink and Stateflow | 529 |
| Zhang H., De Saporta B., Dufour F., Deleuze G. | DOI:10.3303/CET1333089 |
| Dynamic Reliability Assessment for Multi-state Deteriorating Systems | 535 |
| Liu Y., Zuo M.J., Huang H.Z. | DOI:10.3303/CET1333090 |
| Quartz Flexible Accelerometer Stability Duration Prediction on Storage Condition Based on Accelerated Degradation Test | 541 |
| Xu D., Chen Y., Kang R. | DOI:10.3303/CET1333091 |
| Detecting Crack Initiation Based on Acoustic Emission | 547 |
| Keshtgar A., Modarres M. | DOI:10.3303/CET1333092 |
| Sensitivity Analysis for the Dependence of Solder Joints Fatigue Life | 553 |
| Hu W., Liu C., Sun Y., Zhao G. | DOI:10.3303/CET1333093 |
| Electrochemical Migration Failure of the Copper Trace on Printed Circuit Board Driven by Immersion Silver Finish | 559 |
| Zhou Y., Yang P., Yuan C., Huo Y. | DOI:10.3303/CET1333094 |
| Electrical Connector Ultimate Vibration Load Quantization and Application Technology | 565 |
| Feng Q., Zhao K., Sun B., Zhu C. | DOI:10.3303/CET1333095 |
| Failure Behavior Modeling : Towards a Better Characterization of Product Failures | 571 |
| Zeng Z., Chen Y., Kang R. | DOI:10.3303/CET1333096 |
| Lamb Wave Ultrasonic System for Active Mode Damage Detection in Composite Materials | 577 |
| Capineri L., Bulletti A., Calzolai M., Francesconi D. | DOI:10.3303/CET1333097 |
| A Canary Design to Monitor Electromigration of Solder Joints | 583 |
| Hu W., Mou H., Sun Y., Zhao G. | DOI:10.3303/CET1333098 |
| Transient Thermal Analysis of Mcm Towards Understanding Failure Mechanism of Intermittent Faults | 589 |
| Deng G., Yang P., Qiu J., Liu G., Lv K. | DOI:10.3303/CET1333099 |
Part 2 |
|
Simulation |
|
| An Integrated Simulation Method for Bit System Based on Stateflow | 595 |
| Lin X.G., Shi J.Y., Chen L. | DOI:10.3303/CET1333100 |
| Research on the Simulation-based Fault Injection Design with Consideration of Board-level Built-in Test | 601 |
| Li Y., Xu P., Wan H. | DOI:10.3303/CET1333101 |
| Process Interaction Simulation Research of Adapting to Corrective Maintenance | 607 |
| Gao B., Guo L., Ma L., Wang N. | DOI:10.3303/CET1333102 |
Optimization |
|
| Batchsize and Topological Criteria: a Combined Approach to Safely Optimize Hazardous Polymerization Processes | 613 |
| Copelli S., Torretta V., Maestri F., Sala Cattaneo C., Nano G., Rota R. | DOI:10.3303/CET1333103 |
| Machinery Prognostic Method Based on Multi-class Support Vector Machines and Hybrid Differential Evolution – Particle Swarm Optimization | 619 |
| Kimotho J.K., Sondermann-Wolke C., Meyer T., Sextro W. | DOI:10.3303/CET1333104 |
| Controlling the Remaining Useful Lifetime Using Self-optimization | 625 |
| Meyer T., Sondermann-Wolke C., Kimotho J.K., Sextro W. | DOI:10.3303/CET1333105 |
| Ebo Optimization Considering the Joint of Lora and Spare Stocks | 631 |
| Fan J., Guo L., Yang Y., Kang R. | DOI:10.3303/CET1333106 |
| Optimizing Spare Parts Inventory for Time-varying Task | 637 |
| Bian J., Guo L., Yang Y., Wang N. | DOI:10.3303/CET1333107 |
PHM Application in the Aereonautic Industry |
|
| Analysis of Operating Loads on an Aircraft’s Vertical Stabilizer on the Basis of Recorded Data | 643 |
| Woch M. | DOI:10.3303/CET1333108 |
| Testing Method of Integrated Modular Avionics Health Monitoring | 649 |
| Zhang H., Wang S., Liu B., Diao X. | DOI:10.3303/CET1333109 |
| Health Monitoring for Electro-mechanical Nose Landing Gear Door Actuator of a Uav, Based on Simulation Modelling and Data-driven Techniques | 655 |
| Ferreiro S., Jimenez A., Madariaga J., Novillo E., Fernandez S., Alia A., Morante E. | DOI:10.3303/CET1333110 |
| Research on Missile Phm Design Based on Fmeca | 661 |
| Meng J., Zhang W. | DOI:10.3303/CET1333111 |
| A Phm-based Modeling Approach for Fighter Mission-health Incident Matrix | 667 |
| Geng J., Lv C., Li Y., Zhao Y. | DOI:10.3303/CET1333112 |
| A “design of Experiment” Approach to the Performance of Lamb Ultrasonic Wave-based Structural Health Monitoring of Aeronautical Carbon Fibre Reinforced Polymer Laminates | 673 |
| Carboni M., Gianneo A., Giglio M. | DOI:10.3303/CET1333113 |
| Analysis of Partial Fractures on Aircraft Composites Wing | 679 |
| Hou W., Yao J., Wang K., Hu X., Cheng D. | DOI:10.3303/CET1333114 |
PHM Applications in the Rail Industry |
|
| Innovative Management of Wheel-rail Adhesion Conditions in Localization Algorithms for the Automatic Train Protection | 685 |
| Vettori G., Allotta B., Malvezzi M., Pugi L., Ridolfi A., D’Adamio P., Salotti F., Landi L. | DOI:10.3303/CET1333115 |
| Fault Diagnosis of Induction Motor Based on a Novel Intelligent Framework and Transient Current Signals | 691 |
| Tran V.T., Cattley R., Ball A., Liang B., Iwnicki S. | DOI:10.3303/CET1333116 |
| A Preliminary Analysis About the Application of Acoustic Emission and Low Frequency Vibration Methods to the Structural Health Monitoring of Railway Axles | 697 |
| Bruni S., Carboni M., Crivelli D., Guagliano M., Rolek P. | DOI:10.3303/CET1333117 |
| Condition Monitoring of Shinkansen Tracks Based on Inverse Analysis | 703 |
| Kobayashi T., Naganuma Y., Tsunashima H. | DOI:10.3303/CET1333118 |
| Maintenance Optimization of Optronic Equipment | 709 |
| Baysse C., Bihannic D., Gegout-Petit A., Prenat M., De Saporta B., Saracco J. | DOI:10.3303/CET1333119 |
| Anticipating Railway Operation Disruption Events Based on the Analysis of Discrete-event Diagnostic Data | 715 |
| Fink O., Zio E., Weidmann U. | DOI:10.3303/CET1333120 |
| A Tool for Prediction and Optimization of Railway Traction Systems with Respect to an Expected Mission Profile. | 721 |
| Malvezzi M., Pugi L., Conti R., Toni P., Tesi S., Meli E., Rindi A. | DOI:10.3303/CET1333121 |
| Maintenance Performance Improvement for Rolling Stock Wheels | 727 |
| Palo M., Lin J., Larsson-Kråik P.O. | DOI:10.3303/CET1333122 |
| Condition Based Maintenance on Board (cbm Ob) | 733 |
| Trilla A., Gratacos P. | DOI:10.3303/CET1333123 |
| Experimental Evidences in Bearing Diagnostics for Traction System of High Speed Trains | 739 |
| Pennacchi P., Chatterton S., Vania A., Ricci R., Borghesani P. | DOI:10.3303/CET1333124 |
| Railway Wheel Flat and Rail Surface Defect Detection by Time-frequency Analysis | 745 |
| Liang B., Iwnicki S., Feng G., Ball A., Tran V.T., Cattley R. | DOI:10.3303/CET1333125 |
| Prognostic and Simulation Tools for the Preliminary Design and Verifications of Braking Performance of Railway Vehicles | 751 |
| Malvezzi M., Papini S., Pugi L., Vettori G., Tesi S., Rindi A., Meli E. | DOI:10.3303/CET1333126 |
| Verification of Model-based Adhesion Estimation in the Wheel-rail Interface | 757 |
| Hubbard P., Ward C., Dixon R., Goodall R. | DOI:10.3303/CET1333127 |
| Development and Validation of Innovative Weighing in Motion Systems | 763 |
| Ignesti M., Innocenti A., Meli E., Pugi L., Rindi A. | DOI:10.3303/CET1333128 |
| Hybrid Prognosis for Railway Health Assessment: an Information Fusion Approach for Phm Deployment | 769 |
| Galar D., Kumar U., Villarejo R., Johansson C.A. | DOI:10.3303/CET1333129 |
PHM in the Automotive Industry |
|
| An Overall Performance Measure for Vehicle Retirement Decision | 775 |
| Jiang R. | DOI:10.3303/CET1333130 |
| Hemis: Electrical Powertrain Health Monitoring for Increased Safety of Fevs | 781 |
| Sedano B., Ruddle A.R., Unanue I., Low L., Astigarraga D., Ibarra I., Cerro I., Galarza A. | DOI:10.3303/CET1333131 |
| Assessment of the Performance of a Fully Electric Vehicle Subsystem in Presence of a Prognostic and Health Monitoring System | 787 |
| Baraldi P., Barbisotti F., Capanna R., Colombo S., Rigamonti M., Zio E. | DOI:10.3303/CET1333132 |
PHM in the Marine Transportation Industry |
|
| Analysis on Errors Generation in Torsional Angle Measurement of Marine Shaft by Phase Difference Method | 793 |
| Yang K., Yan X., Zhou X., Zheng X., Liao S. | DOI:10.3303/CET1333133 |
| A Fleet Technical Condition Management System for Connected Ships | 799 |
| Zhao J., Sheng C., Yuan C., Zhou X. | DOI:10.3303/CET1333134 |
| On-line Condition Monitoring and Remote Fault Diagnosis for Marine Diesel Engines Using Tribological Information | 805 |
| Yan X., Li Z., Yuan C., Guo Z., Tian Z., Sheng C. | DOI:10.3303/CET1333135 |
| Reliability Analysis of a Marine Lng-diesel Dual Fuel Engine | 811 |
| Wan C., Yan X., Zhang D., Fu S. | DOI:10.3303/CET1333136 |
PHM in the Oil and Gas Industry |
|
| Failure Prediction of Oil Wells by Support Vector Regression with Variable Selection, Hyperparameter Tuning and Uncertainty Analysis | 817 |
| Lins I., Moura M., Lopez Droguett E., Zio E., Couto Jacinto C. | DOI:10.3303/CET1333137 |
| Optimization Models and Prediction of Drilling Rate (rop) for the Brazilian Pre-salt Layer | 823 |
| Couto Jacinto C., Freitas Filho P.J., Nassar S.M., Rosenberg M., Rodrigues D.G., Lima M.D.C. | DOI:10.3303/CET1333138 |
| Optimal Inspection of Onshore Pipelines Subject to External Corrosion | 829 |
| Gomes W., Beck A. | DOI:10.3303/CET1333139 |
PHM in the Nuclear Industry |
|
| Effect of Air Temperature on Failure Prognosis of Passive Containment Cooling System in Ap1000 | 835 |
| Yu Y., Wang S., Niu F. | DOI:10.3303/CET1333140 |
| Remote Monitoring of Equipment in Small Modular Reactors | 841 |
| Upadhyaya B., Mehta C., Lollar V., Hines J. W. | DOI:10.3303/CET1333141 |
| A Belief Function Theory Method for Prognostics in Clogging Filters | 847 |
| Baraldi P., Di Maio F., Mangili F., Zio E. | DOI:10.3303/CET1333142 |
| Monitoring Method Development for Safety Component on Standby State | 853 |
| Sung Min S., Bo Gyung B., Hyun Gook H. | DOI:10.3303/CET1333143 |
| Integrated Condition Monitoring for Plant-wide Prognostics | 859 |
| Wallace C., Costello J., West G., Mcarthur S., Coghlan M. | DOI:10.3303/CET1333144 |
| Probabilistic Support Vector Regression for Short-term Prediction of Power Plants Equipment | 865 |
| Liu J., Seraoui R., Vitelli V., Zio E. | DOI:10.3303/CET1333145 |
| Development of an Integrated Condition Monitoring and Diagnostic System for Process Control Valves Used in Nuclear Power Plant | 871 |
| Carneiro A., Porto Jr A.C. | DOI:10.3303/CET1333146 |
| Remaining Useful Life Estimation of Electric Cables in Nuclear Power Plants | 877 |
| Shumaker B., Ledlow J., O'Hagan R., Mccarter D., Hashemian H. | DOI:10.3303/CET1333147 |
| Reliability Attributes and the Maintenance Rule for Nuclear Power Plant Safety Systems | 883 |
| Saldanha P.L.C., Ferro N.J., Frutuoso E Melo P.F.F., Marques F.F. | DOI:10.3303/CET1333148 |
| A Fuzzy Similarity Based Method for Signal Reconstruction During Plant Transients | 889 |
| Baraldi P., Di Maio F., Genini D., Zio E. | DOI:10.3303/CET1333149 |
| Transients Analysis of a Nuclear Power Plant Component for Fault Diagnosis | 895 |
| Baraldi P., Di Maio F., Rigamonti M., Zio E., Seraoui R. | DOI:10.3303/CET1333150 |
| Lifecycle Prognostic Algorithm Development and Application to Test Beds | 901 |
| Nam A., Sharp M., Hines J. W., Upadhyaya B. | DOI:10.3303/CET1333151 |
| Approximate Gaussian Process Regression with Sparse Functional Learning of Inducing Points for Components Condition Monitoring | 907 |
| Vitelli V., Zio E. | DOI:10.3303/CET1333152 |
| Incorporating Equipment Condition Assessment in Risk Monitors for Advanced Small Modular Reactors | 913 |
| Coble J., Coles G., Meyer R., Ramuhalli P. | DOI:10.3303/CET1333153 |
PHM in the Renewable Energy industry |
|
| Singular Spectrum Analysis for Forecasting of Electric Load Demand | 919 |
| Briceno H., Rocco C., Zio E. | DOI:10.3303/CET1333154 |
| A Genetic Algorithm and Neural Network Technique for Predicting Wind Power Under Uncertainty | 925 |
| Ak R., Li Y., Vitelli V., Zio E. | DOI:10.3303/CET1333155 |
| State of Art Maintenance Applied to Wind Turbines | 931 |
| Barbera L., Guerrero Bolanos A., Crespo A., Gonzalez-Prida V., Guillen A., Gomez J., Sola A. | DOI:10.3303/CET1333156 |
| Model Based Fault Detection of Wind Turbine Drive Trains | 937 |
| Hilbert M., Kuech C., Nienhaus K. | DOI:10.3303/CET1333157 |
PHM for Battery Management Systems |
|
| Thermal-electrochemical Modeling and Parameter Sensitivity Analysis of Lithium-ion Battery | 943 |
| Zhang L., Lyu C., Wang L., Luo W., Ma K. | DOI:10.3303/CET1333158 |
| Evaluation on Performance of Lithium-ion Batteries Based on Internal Physical and Chemical Parameters | 949 |
| Lyu C., Zhang L., Luo W., Ma K., Wang L. | DOI:10.3303/CET1333159 |
| Battery Pack Temperature Estimation Model for Evs and Its Semi-transient Case Study | 955 |
| Kim T.J., Youn B.D., Kim H.J. | DOI:10.3303/CET1333160 |
| A Health Monitoring Method for Li-ion Batteries Based on Profust Reliability Theory | 961 |
| Zhao Z.Y., Quan Q., Cai K.Y. | DOI:10.3303/CET1333161 |
| A Design and Implementation of Power Transfer Equipment Based on Fault Diagnostics in System Level | 967 |
| Luo M., Kang R. | DOI:10.3303/CET1333162 |
PHM Applications in Electronics |
|
| Research on Soft Fault of Computer Numerical Control System | 973 |
| Peng C., Lan L., Liu Q., Yao J. | DOI:10.3303/CET1333163 |
| Actuator Health Prognosis for Designing Lqr Control in Feedback Systems | 979 |
| Langeron Y., Grall A., Barros A. | DOI:10.3303/CET1333164 |
| Classification and Detection of Electrical Control System Faults Through Scada Data Analysis | 985 |
| Godwin J., Matthew P., Watson P. | DOI:10.3303/CET1333165 |
| Prognostic Health Management (phm) of Electrical Systems Using Condition-based Data for Anomaly and Prognostic Reasoning | 991 |
| Hofmeister J., Wagoner R., Goodman D. | DOI:10.3303/CET1333166 |
| Fuzzy Logic Approach for Power Transformer Asset Management Based on Dissolved Gas-in-oil Analysis | 997 |
| Abu-Siada A., Hmood S. | DOI:10.3303/CET1333167 |
PHM for Fuel Cell Systems |
|
| On-line Tracking of Fuel Cell System Impedance Using Extended Kalman Filter | 1003 |
| Debenjak A., Gasperin M., Petrovcic J. | DOI:10.3303/CET1333168 |
| Phm of Proton-exchange Membrane Fuel Cells - a Review | 1009 |
| Jouin M., Gouriveau R., Hissel D., Pera M.C., Zerhouni N. | DOI:10.3303/CET1333169 |
| Experimental Validation of an Identification Procedure of Pemfc Stack State of Health Using Eis Combined with a Physical Impedance Modellin | 1015 |
| Chevalier S., Josset C., Olivier J.C., Auvity B., Trichet D., Machmoum M. | DOI:10.3303/CET1333170 |
| Fuel Cell Health Monitoring Using Self Organizing Maps | 1021 |
| Onanena R., Oukhellou L., Come E., Jemei S., Candusso D., Hissel D., Aknin P. | DOI:10.3303/CET1333171 |
PHM for Rotating Machines |
|
| Features for Fault Diagnosis and Prognosis of Gearbox | 1027 |
| Zhang X., Kang J., Zhao J.S., Cao D.C. | DOI:10.3303/CET1333172 |
| Fault Diagnosis for Crankshaft Bearing in Diesel Engine Based on Bispectrum Analysis | 1033 |
| Feng F.Z., Si A., Jang P. | DOI:10.3303/CET1333173 |
| A Generic Diagnosis and Prognosis Framework : Application to Permanent Magnet Synchronous Machines | 1039 |
| Vinson G., Ribot P., Prado T., Combacau M. | DOI:10.3303/CET1333174 |
| A Statistical Feature Utilising Wavelet Denoising and Neighblock Method for Improved Condition Monitoring of Rolling Bearings | 1045 |
| Roulias D., Loutas T., Kostopoulos V. | DOI:10.3303/CET1333175 |
PHM for Multicomponent Systems |
|
| A Maintenance Free Operating Period Policy for a Multi-component System with Different Information Levels on the Components State | 1051 |
| Lesobre R., Bouvard K., Berenguer C., Barros A., Cocquempot V. | DOI:10.3303/CET1333176 |
| Redundancy System Fault Sampling Under Imperfect Maintenance | 1057 |
| Zhang C., Guo L., Xiao B., Kang R. | DOI:10.3303/CET1333177 |
| An Integrated Decision Model for Critical Component Spare Parts Ordering and Condition Based Replacement with Prognostic Information | 1063 |
| Wang Z., Wang W., Hu C., Liu X. | DOI:10.3303/CET1333178 |
| A Unified Diagnosability Evaluation Framework for Complex Systems | 1069 |
| Liu Y., Song L., Zhang S., Hu Z. | DOI:10.3303/CET1333179 |
Structural Reliability Applications to PHM |
|
| Stochastic Definition of State-space Equation for Particle Filtering Algorithms | 1075 |
| Corbetta M., Sbarufatti C., Manes A., Giglio M. | DOI:10.3303/CET1333180 |
| On Robust Maintenance Scheduling of Fatigue-prone Structural Systems Considering Imprecise Probability | 1081 |
| Patelli E., Valdebenito M., De Angelis M. | DOI:10.3303/CET1333181 |
| Probabilistic Evaluation of a Method for Reduction of Residual Stress in Welded Structure Using Vibration | 1087 |
| Aoki S., Kurita K., Koshimizu S., Nishimura T., Hiroi T., Hirai S. | DOI:10.3303/CET1333182 |
| Electro-migration Model Parameters Sensitivity Analysis Based on the Monte Carlo Method | 1093 |
| Feng W., Wang L., Zhou G., Zhang D., Gu H. | DOI:10.3303/CET1333183 |
| Geometrical and Dimensional Uncertainties Effects Quantification for Stress/strain Field Characterization | 1099 |
| Marcuccio G., Mottershead J., Bonisoli E., Tornincasa S., Patelli E. | DOI:10.3303/CET1333184 |
PHM in Various Industrial Applications |
|
| Health Monitoring of Dc Link Capacitors | 1105 |
| Makdessi M., Sari A., Venet P. | DOI:10.3303/CET1333185 |
| An Experiment on Diagnosis, Reliability Estimation, and Reliability Prognosis | 1111 |
| Rakowsky U.K. | DOI:10.3303/CET1333186 |
| Storage Lifetime Prognosis of an Intermediate Frequency (if) Amplifier Based on Physics of Failure Method | 1117 |
| Hong S., Zhou Z., Lv C. | DOI:10.3303/CET1333187 |