CHEMICAL ENGINEERING
TRANSACTIONS
-
VOL.29
Guest Editors: Petar Sabev Varbanov, Hon Loong
Lam, Jirí Jaromír Klemes
Copyright © 2012, AIDIC Servizi S.r.l.,
ISBN 978-88-95608-20-4
;
ISSN 1974-9791
|
Table
of Contents & Authors Index
|
DOI
|
| Process Heat Transfer Enhancement to Upgrade Performance, Throughput and Reduced Energy Use | 1 |
| Gough M. J. | >DOI: 10.3303/CET1229001 |
| Dyeing Capacity of Eucalyptus Globulus L. on Chemical Pulp: an Overview | 7 |
| Papadaki S. G., Krokida M. C., Economides D., Vlyssides A. G., Koukios E. G. | >DOI: 10.3303/CET1229002 |
| Energy Analysis for Conversion of a Kraft Pulp Mill Into a Dissolving Pulp Mill | 13 |
| Lundberg V., Axelsson E., Mahmoudkhani M., Berntsson T. | >DOI: 10.3303/CET1229003 |
| Optimal Design of a Cogeneration System in a Kraft Process Using Genetic Algorithm | 19 |
| Tahouni N., Jabbari B., Panjeshahi M. H. | >DOI: 10.3303/CET1229004 |
| Investigation of Thermal Analyses Techniques Potential to Determine Solids Content in Eucalyptus Black Liquor Samples | 25 |
| Leite B. S., Andreuccetti M. T., Leite S. A. F., D‘Angelo J. V. H. | >DOI: 10.3303/CET1229005 |
| Mapping of Thermal Energy Integration: Retrofit Assessment of Industrial Plants | 31 |
| Savulescu L., Périn-Levasseur Z., Benali M. | >DOI: 10.3303/CET1229006 |
| New Examples for a Novel Approach for Including Multi Phase Flows Into Pinch Analysis | 37 |
| Ruohonen P. | >DOI: 10.3303/CET1229007 |
| Comparison Between a Detailed Pinch Analysis and the ‘heat Load Model for Pulp and Paper’ – Case Study for a Swedish Thermo-mechanical Pulp and Paper Mill | 43 |
| Isaksson J., Ĺsblad A., Berntsson T. | >DOI: 10.3303/CET1229008 |
| Dynamic Modeling and Control of a Steam Reformer-fuel Cell Power System Operating on Lpg for Vehicular Applications | 49 |
| Ipsakis D., Voutetakis S., Papadopoulou S., Seferlis P., Elmasides C., Papadaki K., Mastrogeorgopoulos S., Kyriakides A. | >DOI: 10.3303/CET1229009 |
| Holistic and Versatile Process Integration Framework for Maximising Resource Efficiency | 55 |
| Abdul-Manan Z., Wan Alwi S. R. | >DOI: 10.3303/CET1229010 |
| Potential of Total Site Process Integration for Balancing and Decreasing the Key Environmental Footprints | 61 |
| Cucek L., Varbanov P. S., Klemeš J. J., Kravanja Z. | >DOI: 10.3303/CET1229011 |
| Industrial Heat Pump Study Using Pinch Technology for a Large Scale Petrochemical Site | 67 |
| Matsuda K., Kurosaki D., Hayashi D., Aoyama K. | >DOI: 10.3303/CET1229012 |
| Total Site Analysis (tsa) and Exergy Analysis for Shaft Work and Associated Steam and Electricity Savings in Low Temperature Processes in Industrial Clusters | 73 |
| Hackl R., Harvey S. | >DOI: 10.3303/CET1229013 |
| Experimental Study on NOX Formation in Gas-staged Burner Based on the Design of Experiments | 79 |
| Belohradský P., Kermes V. | >DOI: 10.3303/CET1229014 |
| Energetic and Exergetic Optimization of an Organosolv-biorefinery Process | 85 |
| Garcia A., González Alriols M., Quijera J. A., Labidi J. | >DOI: 10.3303/CET1229015 |
| Simulation of an Integrated Sustainable Production of Extract from Brazilian Ginseng Roots with a Cogeneration Plant | 91 |
| Santos D. T., Albarelli J. Q., Meireles M. A. A. | >DOI: 10.3303/CET1229016 |
| Importance of the Power-electronic on Integration processes Using Renewable Energies | 97 |
| Hernández-Figueroa M. A., Martinez-Patińo J., Picón-Núńez M., Lozano-García J. M. | >DOI: 10.3303/CET1229017 |
| Defining the Potential of Usable Waste Heat in Industrial Processes with the Help of Pinch and Exergy Analysis | 103 |
| Bendig M., Marechal F., Favrat D. | >DOI: 10.3303/CET1229018 |
| Bioethanol Steam Reforming to Hydrogen over Bimetallic Ceria-supported Catalysts | 109 |
| Palma V., Castaldo F., Ciambelli P., Iaquaniello G. | >DOI: 10.3303/CET1229019 |
| Total Site Methodology as a Tool for Planning and Strategic Decisions | 115 |
| Nemet A., Klemeš J. J., Varbanov P. S., Walmsley M. R. W., Atkins M. J. | >DOI: 10.3303/CET1229020 |
| Design of Hybrid Power Systems with Energy Losses | 121 |
| Mohammad Rozali N. E., Wan Alwi S. R., Abdul-Manan Z., Klemeš J. J. | >DOI: 10.3303/CET1229021 |
| Optimal Selection of Steam Mains in Total Site Utility Systems | 127 |
| Prashant K., Perry S. J. | >DOI: 10.3303/CET1229022 |
| Integration of Steam Power Plant with Process Utility System | 133 |
| Khamis Abadi S., Khoshgoftar Manesh M. H., Amidpour M., Hamidi A. A. | >DOI: 10.3303/CET1229023 |
| Selection of the Optimum Working Fluids in Organic Rankine Cycles Using Topsis | 139 |
| Handayani T., Harvey A. P., Dalton J., Reay D. | >DOI: 10.3303/CET1229024 |
| Retrofit of Steam Power Plants in Eco-industrial Parks | 145 |
| Chen C.-L., Lin C.-Y. | >DOI: 10.3303/CET1229025 |
| Dynamic Solid Phase Microextraction (spme) of Atrazine at Pdms and Pa Coated Fibers | 151 |
| Benhabib K., Town R. M. | >DOI: 10.3303/CET1229026 |
| China’s Thermal Electricity Production and Relative Carbon Dioxide Emissions for the Period 2012-2020 | 157 |
| Jin L., Bouallou C. | >DOI: 10.3303/CET1229027 |
| Dry Reforming of Methane – Review of Feasibility Studies | 163 |
| Er-rbib H., Bouallou C., Werkoff F. | >DOI: 10.3303/CET1229028 |
| Simulation of Carbon Dioxide Sequestration with Mono Ethylene Amine (mea) and Methanol Solvents | 169 |
| Esmaeili A. | >DOI: 10.3303/CET1229029 |
| Dynamic Modelling of the Reactive Absorption of CO2 in Ionic Liquids and Its Effect on the Mass Transfer and Fluid Viscosity | 175 |
| Carvajal D., Jara C.C., Irrázabal M.M. | >DOI: 10.3303/CET1229030 |
| Hydrogenation of Carbon Dioxide for Methanol Production | 181 |
| Van der Ham L. G. J., Van den Berg H., Benneker A., Simmelink G., Timmer J., Van Weerden S. | >DOI: 10.3303/CET1229031 |
| Coal Based Power Plants Using Oxy-combustion for CO2 Capture: Pressurized Coal Combustion to Reduce Capture Penalty | 187 |
| Soundararajan R., Gundersen T. | >DOI: 10.3303/CET1229032 |
| Polyethyleneimine Loading Into High Internal Phase Emulsion Polymer for CO2 Adsorption: Synthesis and Characterization of the Polyhipe | 193 |
| Dejburum P., Saiwan C., Tontiwachwuthikul P. | >DOI: 10.3303/CET1229033 |
| Reduction of Carbon Footprint of Building Structures | 199 |
| Culáková M., Vilceková S., Krídlová Burdová E., Katunská J. | >DOI: 10.3303/CET1229034 |
| Study of Biopolymer Modified with Arginine for CO2 Adsorption | 205 |
| Sae-Jae K., Saiwan C., Tontiwachwuthikul P. | >DOI: 10.3303/CET1229035 |
| Studies of Modification of Biopolymer with Piperazine Derivative for Carbon Dioxide Adsorption | 211 |
| Saiwan C., Srisuwanvichein S., Yoddee P., Idem R., Supap T., Tontiwachwuthikul P., Wongpanit P. | >DOI: 10.3303/CET1229036 |
| Design Space for the Sizing and Selection of Heat Exchangers of the Compact Type | 217 |
| Picón-Núńez M., Polley G. T., Riesco-Avila J. M. | >DOI: 10.3303/CET1229037 |
| Control of Reactive Distillation Through the Multiple Steady State Conditions | 223 |
| Yamaki T., Matsuda K. | >DOI: 10.3303/CET1229038 |
| Some Benefits of Dynamic Simulation of Energy Systems in an Integrated Steel Mill | 229 |
| Henrion T., Werner A. | >DOI: 10.3303/CET1229039 |
| Dynamic Simulation of Concentrating Solar Plants | 235 |
| Vitte P., Manenti F., Pierucci S., Joulia X., Buzzi-Ferraris G. | >DOI: 10.3303/CET1229040 |
| Performance Assessment of Existing Methodologies for Chemical Process Dynamic Simulation | 241 |
| Durand G., Manenti F., Bandoni J. A., Diaz M. S., Buzzi-Ferraris G. | >DOI: 10.3303/CET1229041 |
| Towards the Development of a Training Simulator for Biorefineries | 247 |
| Hass V. C., Kuntzsch S., Gerlach I., Kühn K., Winterhalter M. | >DOI: 10.3303/CET1229042 |
| Designing Sustainable Supply Chains | 253 |
| Young D., Hawkins T., Ingwersen W., Lee S.- J., Ruiz-Mercado G., Sengupta D., Smith R.L. | >DOI: 10.3303/CET1229043 |
| Extending Process-network Synthesis Algorithms with Time Bounds for Supply Network Design | 259 |
| Kalauz K., Sule Z., Bertok B., Friedler F., Fan L. T. | >DOI: 10.3303/CET1229044 |
| Life Cycle Management of Bioplastics for a Sustainable Future in Thailand: Sa-med Island Model | 265 |
| Petchprayul S., Malakul P., Nithitanakul M., Papong S., Wenunun P., Likitsupin W., Chom-in T., Trungkavashirakun R., Sarobol E. | >DOI: 10.3303/CET1229045 |
| Comparing Attic Method with the Existing Techniques for Linear Programming | 271 |
| Manenti F., Buzzi-Ferraris G. | >DOI: 10.3303/CET1229046 |
| Energy Saving Performance of Internal Heat-integrated Batch Distillation | 277 |
| Suzuki Y., Yamaki T., Matsuda K., Takahashi K., Endo A., Nakaiwa M. | >DOI: 10.3303/CET1229047 |
| Analysis of Biomass Gasification and Pemfc Integrated Systems for Power Generation: a Combined Heat and Power Approach | 283 |
| Chutichai B., Tiraset S., Assabumrungrat S., Arpornwichanop A. | >DOI: 10.3303/CET1229048 |
| Energy Saving Processes of Biofuel Production from Fermentation Broth | 289 |
| Nagy E., Hajba L., Hancsók J. | >DOI: 10.3303/CET1229049 |
| Ensuring Cost-effective Heat Exchanger Network Design for Non-continuous Processes | 295 |
| Morrison A. S., Atkins M. J., Walmsley M. R. W. | >DOI: 10.3303/CET1229050 |
| Waste Heat Recovery with Organic Rankine Cycle in the Petroleum Industry | 301 |
| Varga Z., Rabi I., Farkas C. | >DOI: 10.3303/CET1229051 |
| Analysis of Dynamic Characteristics for Self-heat Recuperative Process | 307 |
| Kansha Y., Kishimoto A., Tsutsumi A. | >DOI: 10.3303/CET1229052 |
| A Numerical Study of the Effect of a Venetian Blind on the Convective Heat Transfer Rate from a Recessed Window with Transitional and Turbulent Flow | 313 |
| Oosthuizen P. H., Oghbaie S. | >DOI: 10.3303/CET1229053 |
| Retrofit with Exchanger Relocation of Crude Preheat Train Under Different Kinds of Crude Oils | 319 |
| Yimyam B., Siemanond K. | >DOI: 10.3303/CET1229054 |
| Predicting Minimum Energy Conditions for a Distillation Column by Design of Experiments and Process Simulation | 325 |
| Drljo A., Liebmann B., Wukovits W., Friedl A. | >DOI: 10.3303/CET1229055 |
| Integration Opportunities for Substitute Natural Gas (sng) Production in an Industrial Process Plant | 331 |
| Arvidsson M., Heyne S., Morandin M., Harvey S. | >DOI: 10.3303/CET1229056 |
| Simultaneous Heat Integration and Batch Process Scheduling | 337 |
| Holczinger T., Hegyháti M., Friedler F. | >DOI: 10.3303/CET1229057 |
| Exergy Analysis of Multicomponent Distillation Systems for Efficiency Ranking | 343 |
| Haragovics M., Mizsey P. | >DOI: 10.3303/CET1229058 |
| Development of Conceptual Design Model of Direct Methanol Fuel Cell for a Portable Application | 349 |
| Ismail A., Kamaruddin S. K., Daud W. R. W., Masdar M. S. | >DOI: 10.3303/CET1229059 |
| Evaluation of the Use of Solar Assisted Buoyancy Driven Natural Ventilation of Smaller Theatres in Canada | 355 |
| Oosthuizen P. H. | >DOI: 10.3303/CET1229060 |
| Mimo Lq Control of the Energy Production of a Synchronous Generator in a Nuclear Power Plant | 361 |
| Fodor A., Magyar A., Hangos K. M. | >DOI: 10.3303/CET1229061 |
| Heat Exchanger Network Retrofit by Pinch Design Method Using Stage-model Mathematical Programming | 367 |
| Siemanond K., Kosol S. | >DOI: 10.3303/CET1229062 |
| Self-heat Recuperation Using Magnetocaloric Effect | 373 |
| Kotani Y., Kansha Y., Tsutsumi A. | >DOI: 10.3303/CET1229063 |
| Thermal Desalination Process Based on Self-heat Recuperation | 379 |
| Mizuno H., Kansha Y., Kishimoto A., Tsutsumi A. | >DOI: 10.3303/CET1229064 |
| Online Superstructure Optimization for Energy Saving of an Industrial Gas Distribution System | 385 |
| D‘Isanto M., Manenti F., Grottoli M. G., Altavilla M., Di Marco R. | >DOI: 10.3303/CET1229065 |
| Heat Recovery in Professional Laundry Care Process | 391 |
| Bobák P., Pavlas M., Máša V., Jegla Z., Kšenzuliak V. | >DOI: 10.3303/CET1229066 |
| Mastering Heat Pumps Selection for Energy Efficient Distillation | 397 |
| Kiss A. A., Flores Landaeta S. J., Infante Ferreira C. A. | >DOI: 10.3303/CET1229067 |
| Optimal Stream Discharge Temperatures for a Dryer Operation Using a Thermo-economic Assessment | 403 |
| Walmsley T. G., Walmsley M. R. W., Atkins M. J., Fodor Z., Neale J. R. | >DOI: 10.3303/CET1229068 |
| Total Site Targeting with Stream Specific Minimum Temperature Difference | 409 |
| Fodor Z., Klemeš J. J., Varbanov P. S., Walmsley M. R. W., Atkins M. J., Walmsley T. | >DOI: 10.3303/CET1229069 |
| Graphical Targeting Tool for the Planning of Carbon capture and Storage | 415 |
| Ooi R. E. H., Foo D. C. Y., Ng D. K. S., Tan R. R. | >DOI: 10.3303/CET1229070 |
| Relationship Between Ph and Carbonation Ratio To measure CO2 Capture Efficiency by Nh3 Solvent | 421 |
| Toro Molina C., Bouallou C. | >DOI: 10.3303/CET1229071 |
| Implementation of Heat Integration to Improve the Sustainability of an Integrated Biodiesel Biorefinery | 427 |
| Kastritis D., Vlysidis A., Perry S. J., Theodoropoulos C. | >DOI: 10.3303/CET1229072 |
| Interactive Multi-objective Optimisation of Configurations for an Oxyfuel Power Plant Process for CO2 Capture | 433 |
| Tveit T.-M., Laukkanen T. P., Ojalehto V., Miettinen K., Fogelholm C.-J. | >DOI: 10.3303/CET1229073 |
| Ecological Footprint Comparison of Biobased Pha Production from Animal Residues | 439 |
| Kettl K.-H., Shahzad K., Eder M., Narodoslawsky M. | >DOI: 10.3303/CET1229074 |
| CO2 Valorisation: Production of Synthetic Gasoline and Diesel Fuel from Dry Reforming of Methane | 445 |
| Er-rbib H., Bouallou C., Werkoff F. | >DOI: 10.3303/CET1229075 |
| Energy Integration in an Ngcc Plant with Post-combustion CO2 Capture – Systematic Methodology for Evaluating Process Alternatives | 451 |
| Anantharaman R., Berstad D. | >DOI: 10.3303/CET1229076 |
| Characterisation and Environmental Analysis of Sewage sludge as Secondary Fuel for Cement Manufacturing | 457 |
| Aranda Usón A., Ferreira G., López-Sabirón A. M., Sastresa E. L., De Guinoa A. S. | >DOI: 10.3303/CET1229077 |
| CO2 Abatement Through a Methanol Production Process | 463 |
| Van-Dal E. S., Bouallou C. | >DOI: 10.3303/CET1229078 |
| Integration of Renewables for Improving Companies’ Energy-supplies within Regional Supply Networks | 469 |
| Kiraly A., Pahor B., Kravanja Z. | >DOI: 10.3303/CET1229079 |
| Reduction of the Total Drying Time in Mixed Fluidized Layer | 475 |
| Penicka M., Hoffman P., Fort I., Barton J. | >DOI: 10.3303/CET1229080 |
| Basic Solubility Measurements for the Design of an Integrated Biogas Purification Process | 481 |
| Kerber J., Repke J.-U. | >DOI: 10.3303/CET1229081 |
| The Application of Emergy Evaluation in Energy-chemical Systems Incorporating Waste Influence | 487 |
| Chang H., Xiao F., Hanfeng M. | >DOI: 10.3303/CET1229082 |
| Soco – Storage Optimisation Concepts in Industries, Commerce and District Heating Businesses | 493 |
| Fluch J., Brunner C., Muster-Slawitsch B. | >DOI: 10.3303/CET1229083 |
| Catalytic Solar Thermochemical Processing for Enhance Heat Transfer and Emission-free Production of Hydrogen | 499 |
| Ibrik K., Al-Meer M., Ozalp N. | >DOI: 10.3303/CET1229084 |
| Green Biorefinery – Production of Amino Acids from Grass Silage Juice Using an Ion Exchanger Device at Pilot Scale | 505 |
| Schaffenberger M., Ecker J., Koschuh W., Essl R., Mandl M., Boechzelt H. G., Steinmueller H., Schnitzer H. | >DOI: 10.3303/CET1229085 |
| Investigation of Hydrogel Application on the Culture of Beans to Optimize Water Resource and Productivity | 511 |
| Silva D. P., Pozza A. A. A., Leite B. S., Leite S. A. F. | >DOI: 10.3303/CET1229086 |
| Regiopt Conceptual Planner - identifying Possible Energy Network Solutions for Regions | 517 |
| Niemetz N., Kettl K.-H., Eder M., Narodoslawsky M. | >DOI: 10.3303/CET1229087 |
| System Optimization of an Electric Steel Making Plant with Sequenced Production and Dynamic Stock Level | 523 |
| Lingebrant P., Dahl J., Larsson M., Sandberg E. | >DOI: 10.3303/CET1229088 |
| Fuzzy Optimization for Screening of Sustainable Chemical Reaction Pathways | 529 |
| Liew W. H., Hassim M. H., Ng D. K. S., Hurme M. | >DOI: 10.3303/CET1229089 |
| Organosolv Black Liquor Hydrolysis to Obtain Low Molecular Weight Phenolic Compounds | 535 |
| Erdocia X., Toledano A., Corcuera M. Á., Labidi J. | >DOI: 10.3303/CET1229090 |
| Pretreatment of Wheat Straw by Liquid Hot Water and Organosolv Processes | 541 |
| Weinwurm F., Cunha J., Friedl A. | >DOI: 10.3303/CET1229091 |
| Process of Selection of Building Materials Towards Sustainable Development | 547 |
| Porhincák M., Eštoková A. | >DOI: 10.3303/CET1229092 |
| Lignocellulosic Biomass Dissolution and Fractioning using Ionic Liquids as a Solvent | 553 |
| Liebmann B., Friedl A., Rodrigues J. F. C. | >DOI: 10.3303/CET1229093 |
| The Environmental Based Selection of Building Materials in Office Building | 559 |
| Stajanca M., Porhincak M., Eštoková A., Kapalo P. | >DOI: 10.3303/CET1229094 |
| Process-design Intensification – Direct Synthesis of Adipic Acid in Flow | 565 |
| Vural-Gursel I., Wang Q., Noël T., Hessel V. | >DOI: 10.3303/CET1229095 |
| Falling Film Evaporator: Drying of Ionic Liquids with Low Thermal Stress | 571 |
| Wellner N., Siebeneck K., Scholl S. | >DOI: 10.3303/CET1229096 |
| Drying Energy Saving by Applying Self-heat Recuperation Technology to Biomass Drying System | 577 |
| Liu Y., Aziz M., Kansha Y., Tsutsumi A. | >DOI: 10.3303/CET1229097 |
| Research of Foam Gypsum Drying Process and Heat Flow Transfer | 583 |
| Brencis R., Iljins U., Skujans J., Gross U. | >DOI: 10.3303/CET1229098 |
| Reactive Distillation - a Viable Solution for Etherification of Glycerol with Tert-butyl Alcohol | 589 |
| Vlad E., Bildea C. S. | >DOI: 10.3303/CET1229099 |
| Simulation of Middle Vessel Batch Reactive Distillation Column: Application to Hydrolysis of Methyl Lactate | 595 |
| Edreder E. A., Mujtaba I. M., Emtir M. M. | >DOI: 10.3303/CET1229100 |
| Mechanical Pretreatment of Lignocellulosic Biomass Using a Screw Press as an Essential Step in the Biofuel Production | 601 |
| Yan Q., Modigell M. | >DOI: 10.3303/CET1229101 |
| Microalgae Based Biorefinery: Evaluation of Several Routes for Joint Production of Biodiesel, Chlorophylls, Phycobiliproteins, Crude Oil and Reducing Sugars | 607 |
| González-Delgado A. D., Kafarov V. | >DOI: 10.3303/CET1229102 |
| Production of Bio Gas Oil Containing Diesel Fuel with Upgraded Cold Flow Properties by Co-processing | 613 |
| Tóth C., Baladincz P., Hancsók J. | >DOI: 10.3303/CET1229103 |
| Integrated Bioethanol Separation and Dehydration in a Novel Extractive Dwc | 619 |
| Ignat R. M., Kiss A. A. | >DOI: 10.3303/CET1229104 |
| Theoretical and Practical Considerations for Using Phase Change Materials Into Spanish Banking Office | 625 |
| Mainar-Toledo M. D., Aranda Usón A., Barrio F., Ferreira G. | >DOI: 10.3303/CET1229105 |
| H2s Removal in Biogas by Direct Catalytic Oxidation to Sulphur on V2o5/ceo2 Catalysts | 631 |
| Palma V., Barba D., Ciambelli P. | >DOI: 10.3303/CET1229106 |
| Optimising the Catalyst Load for Microwave Susceptible Catalysed Dpf | 637 |
| Palma V., Ciambelli P., Meloni E. | >DOI: 10.3303/CET1229107 |
| Tests of Adsorption of Amino-acids on the Natural Phosphate of the El Hadba Layer, Djebel Onk, Algeria | 643 |
| Bezzi N., Aifa T., Kennouche S., Hamoudi S., Merabet D. | >DOI: 10.3303/CET1229108 |
| Waste-to-energy Facility Planning Supported by Stochasting Programming - Part I Introduction | 649 |
| Šomplák R., Pavlas M., Ucekaj V., Popela P. | >DOI: 10.3303/CET1229109 |
| Optimisation of Operating Parameters in Multi-stage Pyrolysis | 655 |
| Oyedun A. O., Lam K.-L., Gebreegziabher T., Lee H. K. M., Hui C.-W. | >DOI: 10.3303/CET1229110 |
| CFD Study on Fluidized Bed Pyrolyzers | 661 |
| Lam K.-L., Gebreegziabher T., Oyedun A. O., Lee H. K. M., Hui C.-W. | >DOI: 10.3303/CET1229111 |
| Stress Study on Different Designs of Ceramic High Temperature Heat Exchangers | 667 |
| Luo T., Ma T., Zeng M., Wang Q. | >DOI: 10.3303/CET1229112 |
| Industrial and Hazardous Waste Combustion and Energy Production | 673 |
| Kropác J., Bébar L., Pavlas M. | >DOI: 10.3303/CET1229113 |
| Optimization of MSW Feed for Waste to Energy Practices | 679 |
| Gebreegziabher T., Oyedun A. O., Lam K.-L., Lee H. K. M., Hui C.-W. | >DOI: 10.3303/CET1229114 |
| Combustion Behaviour and Products of Dried Sewage Sludge – Prediction by Thermogravimetric Analysis and Monitoring the Co-incineration Process in a Cement Factory | 685 |
| Mislej V., Novosel B., Vuk T., Grilc V., Mlakar E. | >DOI: 10.3303/CET1229115 |
| Problems Found in the Adaptation of a Fluid Cracking Catalytic Pilot Plant for Studing second Generation Biofuel Production by Pyrolysis | 691 |
| Figueiredo M. A. G., Mendes F. L. | >DOI: 10.3303/CET1229116 |
| Kinetic Modelling and Analysis of Waste Bamboo Pyrolysis | 697 |
| Oyedun A. O., Lam K.-L., Gebreegziabher T., Lee H. K. M., Hui C.-W. | >DOI: 10.3303/CET1229117 |
| Biomass Corridor Synthesis for Malaysia Green Energy Supply Chain | 703 |
| Ng W. P. Q., Ng R. T. L., Lam H. L., Kamal M., Ng E. H., Ng D. K. S. | >DOI: 10.3303/CET1229118 |
| Anaerobic Co-digestion of Fats, Oils and Grease (fog) with Waste Activated-sludge | 709 |
| Lauwers J., Appels L., Taes S., Van Impe J., Dewil R. | >DOI: 10.3303/CET1229119 |
| Experimental Investigation of the Sewage Sludge Gasification Process in the Fixed Bed Gasifier | 715 |
| Werle S., Wilk R. K. | >DOI: 10.3303/CET1229120 |
| Determination of Lower Heating Value of Municipal Solid Waste by Mathematical Analysis of a Plant Production Data from a Real Waste-to-energy Plant | 721 |
| Benácková J., Frýba L., Pavlas M., Hejl M. | >DOI: 10.3303/CET1229121 |
| Dual-fuel Cycles to Increase the Efficiency of Wte Installations | 727 |
| Becidan M., Anantharaman R. | >DOI: 10.3303/CET1229122 |
| Impact of Hy as an Additive in Pd/hbeta Catalyst on Waste Tire Pyrolysis Products | 733 |
| Manchantrarat N., Jitkarnka S. | >DOI: 10.3303/CET1229123 |
| Waste-to-energy Facility Planning Supported by Stochastic Programming - Part Ii Model Development and Application | 739 |
| Šomplák R., Touš M., Ferdan T., Pavlas M., Popela P. | >DOI: 10.3303/CET1229124 |
| Modelling of 1 Mw Solid Biomass Combustor: Simplified Balance-based Bed Model Coupled with Freeboard CFD Simulation | 745 |
| Hájek J., Jurena T. | >DOI: 10.3303/CET1229125 |
| Environmental and Economic Performances of Different Technologies for Power Generation from Rice Husks | 751 |
| Prasara-A J., Cucek L., Varbanov P. S., Klemeš J. J. | >DOI: 10.3303/CET1229126 |
| Simulation of the Accumulator Tank Coupled with the Power Unit of Power Plant Under the Conditions of Open Electricity Market | 757 |
| Volkova A., Hlebnikov A., Siirde A. | >DOI: 10.3303/CET1229127 |
| Integration of Desalination Systems to Low Grade Heat Source in Site Utility | 763 |
| Ghalami H., Manesh M. H. K., Amidpour M., Hamidi A. A. | >DOI: 10.3303/CET1229128 |
| Estimation of the Energy Efficiency of a Wood Gasification CHP Plant Using Aspen Plus | 769 |
| François J., Abdelouahed L., Mauviel G., Feidt M., Rogaume C., Mirgaux O., Patisson F., Dufour A. | >DOI: 10.3303/CET1229129 |
| Application of Alternative Configuration of Cogeneration Plant in Order to Meet Power and Water Demand | 775 |
| Ghelichzadeh J., Derakhshan R., Asadi A. | >DOI: 10.3303/CET1229130 |
| Integrating the Compression Heat in Oxy-combustion Power Plants with CO2 Capture | 781 |
| Fu C., Gundersen T. | >DOI: 10.3303/CET1229131 |
| Emerging Technologies in Biomedical Waste Treatment and Disposal | 787 |
| Thakur Y., Katoch S. S. | >DOI: 10.3303/CET1229132 |
| A System Analysis of Lkab Malmberget Heating System to Centralisation and Substitution of Fossil Fuels To biofuels | 793 |
| Riesbeck J., Sandberg J., Wang C. | >DOI: 10.3303/CET1229133 |
| Flue Gas CO2 Capture by Microalgae in Photobioreactor: a Sustainable Technology | 799 |
| Iancu P., Plesu V., Velea S. | >DOI: 10.3303/CET1229134 |
| Carbon Reduction of Gypsum Produced from Flue Gas Desulfurization | 805 |
| Kato T., Murakami K., Sugawara K. | >DOI: 10.3303/CET1229135 |
| Preparation of Adsorbents Derived from Waste Tires | 811 |
| Lopez G., Artetxe M., Amutio M., Erkiaga A., Alvarez J., Barbarias I., Olazar M. | >DOI: 10.3303/CET1229136 |
| Valorisation of Waste Tires by Pyrolysis over a Fcc Catalyst in a Conical Spouted Bed Reactor | 817 |
| Amutio M., Lopez G., Artetxe M., Erkiaga A., Alvarez J., Barbarias I., Olazar M. | >DOI: 10.3303/CET1229137 |
| Orange Solid Waste Valorization: Optimization of Pectinase Extraction and Enzimatic Treatment of Orange Press Liquor | 823 |
| Garcia-Castello E. M., Mayor L., Alcaraz N., Gras M. L., Argüelles A., Vidal-Brotóns D. | >DOI: 10.3303/CET1229138 |
| New Physico-chemical Regeneration Process of Cip Solutions | 829 |
| Dif M., Blel W., Sire O. | >DOI: 10.3303/CET1229139 |
| Supply Network Design and the Utilisation of Rubber Seed Oil as Biofuel and Biochemicals | 835 |
| Ng W. P. Q., Lam H. L., Yusup S. | >DOI: 10.3303/CET1229140 |
| Dynamic Modelling of the Gasification Region of a Bubbling Fluidized Bed Gasifier | 841 |
| Oliveira C., da Silva J. D. | >DOI: 10.3303/CET1229141 |
| Study of Ce Promoter on Nano Structure Iron Catalyst in Fischer-tropsch Synthesis | 847 |
| Zamani Y., Bakavoli M., Rahimizadeh M., Mohajeri A., Seyedi S. M. | >DOI: 10.3303/CET1229142 |
| Cals-technology for Production of Dibasic Lead Phosphite in Phosphoric Sludge Utilization | 853 |
| Kvasyuk A., Koltsova E., Bessarabov A., Bulatov I., Stepanova T. | >DOI: 10.3303/CET1229143 |
| Study of the Thermal Behavior of Sewage Sludge from A wwtp in Cantabria (spain) by Tg-dsc-ms | 859 |
| Fernández J., González F., Pesquera C., Blanco C., Renedo M. J. | >DOI: 10.3303/CET1229144 |
| Green Potential from Palm Biomass in Malaysia | 865 |
| Lam H. L., Ng W. P. Q., Ng F. Y., Kamal M., Lim J. H. E. | >DOI: 10.3303/CET1229145 |
| Biogas Clean-up and Upgrading by Adsorption on Commercial Molecular Sieves | 871 |
| Pagliai P., Di Felice R. | >DOI: 10.3303/CET1229146 |
| Studies Concerning the Integrated Use of Sweet Sorghum for Bioethanol Production in Romania | 877 |
| Ceclan R. E., Pop A., Ceclan M. | >DOI: 10.3303/CET1229147 |
| Residual Minimization Approach for Kinetics Parameter Estimation for Hydrogen Production from Gasification of Palm Kernel Shell | 883 |
| Ahmed T. Y., Ahmad M. M., Lam H. L., Yusup S. | >DOI: 10.3303/CET1229148 |
| Analysis of the Predictive Models of Oil and Gas Transportation Ducts' Rehabilitation | 889 |
| Abdelbaki N., Bouali E., Gaceb M., Bettayeb M. | >DOI: 10.3303/CET1229149 |
| Effect of Biomass High-frequency Pre-treatment on Combustion Characteristics | 895 |
| Barmina I., Lickrastina A., Purmalis M., Zake M., Valdmanis R., Valdmanis J., Arshanitsa A., Solodovnik V., Telisheva G. | >DOI: 10.3303/CET1229150 |
| Effect of Main Characteristics of Pelletized Renewable Energy Resources on Combustion Characteristics and Heat Energy Production | 901 |
| Barmina I., Lickrastina A., Zake M., Arshanitsa A., Solodovnik V., Telisheva G. | >DOI: 10.3303/CET1229151 |
| Energy Intensity of Two-stage Fermentative Hydrogen Production from Biomass in a Plant Equipped with Fuel Cells for Power Supply | 907 |
| Markowski M., Urbaniec K., Budek A. | >DOI: 10.3303/CET1229152 |
| Optimal Predictive Control Strategies for Polygeneration Systems | 913 |
| Menon R. P., Maréchal F. | >DOI: 10.3303/CET1229153 |
| Industry Energy Optimization: a Case Study in a Biodiesel Production Site | 919 |
| Palmeira J., Silva J. M., Matos H. A. S. | >DOI: 10.3303/CET1229154 |
| Implementation and Validation of a Three-dimensional Multiphase-cfd-model for Blast Furnace Processes | 925 |
| Maier C., Jordan C., Harasek M. E., Feilmayr C., Thaler C. | >DOI: 10.3303/CET1229155 |
| Continuous Function Approximation for Dispersed Phase Distribution in Suspension Polymerization | 931 |
| Palau G. R., Isopescu R., Lavric V. | >DOI: 10.3303/CET1229156 |
| Data Reconciliation and Energy Audits for Ptt Gas Separation Plant No.5 (gsp5) | 937 |
| Yongkasemkul P., Siemanond K., Nivartvong N., Chaleoysamai Y., Chuvaree R. | >DOI: 10.3303/CET1229157 |
| Kinetics of Sulcis Coal Chemical Cleaning Process | 943 |
| Lallai A., Pistis A., Fois E. | >DOI: 10.3303/CET1229158 |
| Statistical Analysis of Electrochemical Noise Records in Paintings Barrier Type | 949 |
| Urréjola S., Sánchez A., Lanchas S., Maceiras R., Cancela A. | >DOI: 10.3303/CET1229159 |
| Study of Influence of Combustible Gas on Explosion Parameters of Black Coal Dust | 955 |
| Serafín J., Mynarz M., Konderla I., Bebcák A., Lepík P. | >DOI: 10.3303/CET1229160 |
| Obstacles in the Utilization of Biodiesel as the Fuel in Small Stationary Combustion Units | 961 |
| Kermes V., Skryja P., Nejezchleb R. | >DOI: 10.3303/CET1229161 |
| Determination of Impinging Jet Correlation and Dissolution of Materials | 967 |
| Phupongskorn T., Rirksomboon T., Lister D. H., Steward F. R. | >DOI: 10.3303/CET1229162 |
| Kinetics of Oxide Formation on Carbon Steel Surface in the Presence of Oxygen-nitrogen Mixtures | 973 |
| Weerakul S., Steward F. R., Rirksomboon T., Feicht A., Kongvarhodom C. | >DOI: 10.3303/CET1229163 |
| Mass Transfer in Gas-liquid Flow in Corning® Advanced-flow™ Reactors | 979 |
| Lavric E. D., Cerato-Noyerie C. | >DOI: 10.3303/CET1229164 |
| The Oligomerization of Olefin Hydrocarbons in Light Fcc Naphtha on Ion Exchange Resin Catalyst | 985 |
| Kriván E., Valkai I., Hancsók J. | >DOI: 10.3303/CET1229165 |
| Evaluation of Hydrogen Sorption Enhanced Reforming with CO2 Capture | 991 |
| Ochoa-Fernández E., Jensen S. F., Rytter E., Boerresen B. T., Krogh B. | >DOI: 10.3303/CET1229166 |
| Reconnaissance of Reaction Networks and Kinetics by New Combination of Analytical Technique | 997 |
| Litzmann O., Grützner T., Merz T., Mueller C., Wozny G., Repke J.-U. | >DOI: 10.3303/CET1229167 |
| Investigation of Isomerisation of Light Naphtha Fractions | 1003 |
| Szoboszlai Z., Pölczmann G., Hancsók J. | >DOI: 10.3303/CET1229168 |
| Investigation of Autoclave’s Cooling Jacket Static and Dynamic Behaviour | 1009 |
| Siménfalvi Z., Venczel G., Szepesi G. | >DOI: 10.3303/CET1229169 |
| Solution Strategies for the Synthesis of Heat-integrated Process Water Networks | 1015 |
| Ahmetovic E., Kravanja Z. | >DOI: 10.3303/CET1229170 |
| On the Production of Liquid Synthetic Motor Fuels | 1021 |
| Lin J., Bouallou C., Werkoff F. | >DOI: 10.3303/CET1229171 |
| Environmental Implications of the Valorisation of the Residual Fraction Refused by Mbt Plants | 1027 |
| Vásquez D. Z., Ferreira G., Aranda Usón A., Bribián I. Z. | >DOI: 10.3303/CET1229172 |
| Steelmaking Integrated with a Polygeneration Plant for Improved Sustainability | 1033 |
| Ghanbari H., Helle M., Pettersson F., Saxén H. | >DOI: 10.3303/CET1229173 |
| A Mathematical Model for Removal of Voc’s from Polluted Air Utilizing a Biofilter | 1039 |
| Vafajoo L., Naserranjbar A., Khorasheh F. | >DOI: 10.3303/CET1229174 |
| X-ray Difraction Analysis of Desulfurant Sorbents Prepared by Mixing Calcined Sewage Sludge and Cao in Distilled Or Seawater | 1045 |
| Renedo M. J., González Pellón L., Fernández J. | >DOI: 10.3303/CET1229175 |
| Using Hydrated Lime and Dolomite for Sulfur Dioxide Removal from Flue Gases | 1051 |
| Özyuguran A., Ersoy-Meriçboyu A. | >DOI: 10.3303/CET1229176 |
| Balances of Contaminants in Flue Gas from Municipal Waste Incineration Plant | 1057 |
| Jecha D., Bébar L., Stehlík P. | >DOI: 10.3303/CET1229177 |
| Combined Flue Gas Cleaning from Persistent Organic Compounds and Nitrogen Oxides in the Multifunction Filter | 1063 |
| Jedlicka F., Jecha D., Bébar L., Oral J., Stehlík P. | >DOI: 10.3303/CET1229178 |
| Swirling Flow Prediction in Model Combustor with Axial Guide Vane Swirler | 1069 |
| Vondál J., Hájek J. | >DOI: 10.3303/CET1229179 |
| How Does E-chemistry Work? | 1075 |
| Iancu P., Stroescu M. C., Josceanu A. M., Danciu T. D., Pârvulescu O. C., Boscornea C., Alexa L. | >DOI: 10.3303/CET1229180 |
| Techno-economic Assessment of the Fermentative Hydrogen Production from Sugar Beet | 1081 |
| Urbaniec K., Grabarczyk R. | >DOI: 10.3303/CET1229181 |
| Integration of a Biomass-to-hydrogen Process in an Oil Refinery | 1087 |
| Brau J.-F., Morandin M., Berntsson T. | >DOI: 10.3303/CET1229182 |
| Comprehensive Modeling of Hydrogen Network in Petrochemical Complexes | 1093 |
| Tahouni N., Shariati M., Panjeshahi M. H. | >DOI: 10.3303/CET1229183 |
| Hydrogen Integration in Petroleum Refining | 1099 |
| Smith R., Zhang N., Zhao J. | >DOI: 10.3303/CET1229184 |
| Tube Fitted Bulk Monolithic Catalyst as a Novel Concept for Hydrogen Production for Fuel Cell Application | 1105 |
| Zamaniyan A., Bahadoran F., Ghadirian H. A. | >DOI: 10.3303/CET1229185 |
| Combined Plasma Reforming of Co2-containing Natural Gas with Steam and Partial Oxidation in a Multistage Gliding Arc Discharge System: Effect of Stage Number | 1111 |
| Arthiwet N., Chavadej S. | >DOI: 10.3303/CET1229186 |
| Best Practices for Small-scale Biomass Based Energy Applications in Eu-27: the Case of Fermentative Biohydrogen Generation Technology | 1117 |
| Karaoglanoglou L., Koullas D., Diamantopoulou L., Panagiotopoulos I., Papadaki S., Koukios E. | >DOI: 10.3303/CET1229187 |
| Modelling and Optimisation of Gasification for Palm Kernel Shell (pks) in a Fluidized Bed Gasifier | 1123 |
| Ng R. T. L., Ng D. K. S., Tay D. H. S., Ghani W. A. W. A. K. | >DOI: 10.3303/CET1229188 |
| Process Integration of Algae Production and Anaerobic Digestion | 1129 |
| Polakovicová G., Kušnír P., Nagyová S., Mikulec J. | >DOI: 10.3303/CET1229189 |
| Utilization of Sweet Sorghum as a Catch Crop for Providing Raw Materials for the Production of Bioethanol and Biogas | 1135 |
| Theuretzbacher F., Kravanja P., Becker M., Bauer A., Amon B., Friedl A., Potthast A., Amon T. | >DOI: 10.3303/CET1229190 |
| Energy Efficient Recovery of Methanol and Glycerol in Biodiesel Production | 1141 |
| Ignat R. M., Kiss A. A. | >DOI: 10.3303/CET1229191 |
| Overview of Biofuels for Aviation | 1147 |
| Sandquist J., Güell B. M. | >DOI: 10.3303/CET1229192 |
| Analysis of Macroalgae Oil Transesterification for Biodiesel Production | 1153 |
| Urréjola S., Maceiras R., Pérez L., Cancela A., Sánchez A. | >DOI: 10.3303/CET1229193 |
| Pah Occurrence During Combustion of Biodiesel from Various Feedstocks | 1159 |
| Llamas Lois A., Al-Lal A., Canoira L., Del Campo M., Lapuerta M. | >DOI: 10.3303/CET1229194 |
| Combined first and second Generation Ethanol Production: Analysis of Supercritical Hydrolysis | 1165 |
| Albarelli J. Q., Ensinas A. V., Silva M. A. | >DOI: 10.3303/CET1229195 |
| Simulation Study on the Applicability and Performance of Conventional and Reverse-selective Membranes for Upgrading of H2/co2 Mixtures via Gas-permeation | 1171 |
| Wukovits W., Chudzicki M., Makaruk A., Friedl A. | >DOI: 10.3303/CET1229196 |
| Biodiesel from Waste Vegetable Oils | 1177 |
| Ceclan R. E., Pop A., Ceclan M. | >DOI: 10.3303/CET1229197 |
| Life Cycle Assessment of Biodiesel Production from Microalgae in Thailand: Energy Efficiency and Global Warming Impact Reduction | 1183 |
| Wibul P., Malakul P., Pavasant P., Kangvansaichol K., Papong S. | >DOI: 10.3303/CET1229198 |
| A Novel and Flexible Energy Management Strategy with Application in a Hydrolytic Solar Hydrogen Autonomous System | 1189 |
| Ziogou C., Ipsakis D., Tsita K. G., Seferlis P., Bezergianni S., Papadopoulou S., Voutetakis S. | >DOI: 10.3303/CET1229199 |
| Adsorptive Desulfurization of Bioethanol-derived propylene Using Porous Iron Oxide | 1195 |
| Yamamoto T., Endo A., Ohmori T. | >DOI: 10.3303/CET1229200 |
| Estimating the Energy Savings Potential in a Residential Area of Valparaiso (chile) by Roof Integrated Unglazed Solar Collectors for Domestic Solar Water Heating | 1201 |
| Carvajal D., Araya D. | >DOI: 10.3303/CET1229201 |
| Integration of Solar Thermal Energy and Heat Pump in a Fish Canning Process Combining Pinch and Exergy Analysis | 1207 |
| Quijera A. J., Garcia A., Labidi J. | >DOI: 10.3303/CET1229202 |
| Environmental Impacts of Grid Connected Photovoltaic System Adapted for Peak Load Reduction in Kuwait | 1213 |
| Ghoneim A. A. | >DOI: 10.3303/CET1229203 |
| Area Targeting and Storage Temperature Selection for Heat Recovery Loops | 1219 |
| Walmsley M. R. W., Walmsley T. G., Atkins M. J., Neale J. R. | >DOI: 10.3303/CET1229204 |
| Analysis in a Test Bench for Geothermal Heat Pump with Simultaneous Production of Domestic Hot Water with Heating Or Cooling and Efficiency Improvements | 1225 |
| Álvarez J. T., Pérez F. C., Toimil S. F., Alfaya M. E. V., Fernández–Arroyo J. I. R., Da Costa E. A. | >DOI: 10.3303/CET1229205 |
| Reducing the Criteria Dimensionality in Multi-objective Optimisation of Biomass Energy Supply Chains | 1231 |
| Cucek L., Klemeš J. J., Varbanov P. S., Kravanja Z. | >DOI: 10.3303/CET1229206 |
| Production of Diesel Fuel via Hydrogenation of Rancid Lard and Gas Oil Mixtures | 1237 |
| Baladincz P., Tóth C., Hancsók J. | >DOI: 10.3303/CET1229207 |
| Improving the Low-temperature Properties and Filterability of Biodiesel | 1243 |
| Plata V., Kafarov V., Castillo E. | >DOI: 10.3303/CET1229208 |
| Integrating Renewable Energy to Power, Heat and Water Systems | 1249 |
| Martinez-Patińo J., Picón-Núńez M., Hernández-Figueroa M. A., Estrada-García H. J. | >DOI: 10.3303/CET1229209 |
| A Thermodynamic Approach to the Integration of a Sugar Cane Bagasse Gasifier with a Solid Oxide Fuel Cell | 1255 |
| Arteaga-Pérez L. E., Casas-Ledón Y., Pérez-Bermúdez R., Rodríguez-Machín L., Peralta-Suárez L. M., Santos R., Dewulf J. | >DOI: 10.3303/CET1229210 |
| Optimization of Water Network Integrated with Process Models | 1261 |
| Deng C., Feng X. | >DOI: 10.3303/CET1229211 |
| Influence of an Intermediate Thermal Hydrolysis Process (ithp) on the Kinetics of Anaerobic Digestion of Sewage Sludge | 1267 |
| Shana A. D., Ouki S., Asaadi M., Pearce P. | >DOI: 10.3303/CET1229212 |
| Disintegration of Sewage Sludge for Improved Dewaterability | 1273 |
| Elsäßer T., Houdková L., Belohradský P., Stehlík P. | >DOI: 10.3303/CET1229213 |
| Use of the Modelling in the Development of a Technology for Treating Wastewater from a Dangerous Process | 1279 |
| Ríos Hidalgo L. M., Peralta Suárez L. M., Arteaga-Pérez L. E. | >DOI: 10.3303/CET1229214 |
| Evolution of Membrane Performance During the Ultrafiltration of Reactive Black 5 Solutions: Effect of Feed Characteristics and Operating Pressure | 1285 |
| Alventosa-deLara E., Barredo-Damas S., Alcaina-Miranda M. I., Iborra-Clar M. I. | >DOI: 10.3303/CET1229215 |
| Phenol Degradation over Mesoporous-assembled Srtixzn1-xo3 Nanocrystal Photocatalysts: Effects of Metal Loadings | 1291 |
| Tiyawarakul S., Chavadej S., Rangsunvigit P. | >DOI: 10.3303/CET1229216 |
| Contribution to Tannery Waste Water Treatment for Chromium Removal/recycle by Means of Cation Exchange Resins | 1297 |
| Batzias F. A., Sidiras D. K., Politi D. V. | >DOI: 10.3303/CET1229217 |
| Adsorption of Heavy Metal Lons Onto Green Microalga Chlamydomonas Reinhardtii | 1303 |
| Kondo K., Shigehisa H., Matsumoto M. | >DOI: 10.3303/CET1229218 |
| Experimental Investigation of Adsorption of Heavy Metals (copper (ii)) from Industrial Wastewater with Clinoptilolite | 1309 |
| Dizadji N., Dehpouri S., Seyed Vossoughi S. S. | >DOI: 10.3303/CET1229219 |
| Removal of Selected Micropollutants by Ozonation | 1315 |
| Derco J., Dudáš J., Šilhárová K., Valicková M., Melicher M., Luptáková A. | >DOI: 10.3303/CET1229220 |
| Hydrodynamics Study of Sludge in Anaerobic Digesters | 1321 |
| Low S. C., Parthasarathy R., Slatter P., Eshtiaghi N. | >DOI: 10.3303/CET1229221 |
| Accounting for Thermal Resistance of Cooling Water Fouling in Plate Heat Exchangers | 1327 |
| Arsenyeva O. P., Tovazhnyansky L. L., Kapustenko P. O., Demirskyy O. V. | >DOI: 10.3303/CET1229222 |
| Methodology of Calculating Reaction-diffusion Processes with Moving Boundaries of Kinetic Zones | 1333 |
| Musabekova L. M., Dausheeva N. N., Jamankarayeva M. A. | >DOI: 10.3303/CET1229223 |
| Geometry Optimization of a Gas Preheater inlet Region – a Case Study | 1339 |
| Turek V., Belohradský P., Jegla Z. | >DOI: 10.3303/CET1229224 |
| Best Available Techniques in Municipal Solid Waste Incineration: State of the Art in Spain and Portugal | 1345 |
| Margallo M., Aldaco R., Bala A., Fullana P., Irabien A. | >DOI: 10.3303/CET1229225 |
| Challenges in Design of Polymer Falling Film Heat Exchangers | 1351 |
| Dreiser C., Bart H.-J. | >DOI: 10.3303/CET1229226 |
| Fuzzy Fouling Model of Large Scale Flexible Plastic Heat Exchangers | 1357 |
| Dohnal M., Raudenský M., Horský J. | >DOI: 10.3303/CET1229227 |
| Robust Control of Heat Exchangers | 1363 |
| Vasickaninová A., Bakošová M. | >DOI: 10.3303/CET1229228 |
| Experimental Analysis of Heat Transformer Using the Six Sigma Methodology | 1369 |
| Contreras Valenzuela M. R., Rodriguez Martinez A., Romero-Domínguez J. | >DOI: 10.3303/CET1229229 |
| Simulation of Coking in Convection Section of Steam Cracker | 1375 |
| Mahulkar A. V., Heynderickx G. J., Marin G. B. | >DOI: 10.3303/CET1229230 |
| Recent Situation and Actual Possibilities in Development of Sea Water Desalination Equipment | 1381 |
| Hájek Z., Jegla Z. | >DOI: 10.3303/CET1229231 |
| Analysis of Possibilities of Elimination of Liquid Droplets from Gas Flow for Mitigation of Operating Problems of Gas Preheater | 1387 |
| Pacíska T., Jegla Z., Reppich M. | >DOI: 10.3303/CET1229232 |
| Analysis of Plucking of U-tubes in Heat Exchanger | 1393 |
| Lošák P., Kilkovský B., Jegla Z. | >DOI: 10.3303/CET1229233 |
| Experimental and Numerical Investigation of Wall Heat Fluxes in a Gas Fired Furnace: Practicable Models for Swirling Non-premixed Combustion | 1399 |
| Broukal J., Vondál J., Hájek J. | >DOI: 10.3303/CET1229234 |
| Measurement and Evaluation of Experimental Data for Modelling Thermal Decomposition of Solid Materials | 1405 |
| Hasalová L., Ira J., Jahoda M. | >DOI: 10.3303/CET1229235 |
| Half-ripe Mangaba (hancornia Speciosa Gomes) Freezing Kinetics with Different Diameters | 1411 |
| Soares D. S. C., Silva G. F., Silva T. C. S., Nunes T. P., Oliveira Júnior A. M. | >DOI: 10.3303/CET1229236 |
| E-chemistry for K12 | 1417 |
| Josceanu A. M., Dumitrescu A., Isopescu R., Onofrei R., Stanciu R., Plesu V., Alexa L. | >DOI: 10.3303/CET1229237 |
| Retrofit Procedure for Intensifying Heat Transfer in Heat Exchanger Networks Prone to Fouling Deposition | 1423 |
| Pan M., Bulatov I., Smith R. | >DOI: 10.3303/CET1229238 |
| Cfd-based Optimisation of Spiral Wound Heat Exchanger Geometry | 1429 |
| Steube J., Lautenschleger A., Piper M., Böe D., Weimer T., Kenig E. | >DOI: 10.3303/CET1229239 |
| Optimising a Plant Economic and Environmental Performance over a Full Lifetime | 1435 |
| Nemet A., Klemeš J. J., Kravanja Z. | >DOI: 10.3303/CET1229240 |
| Mitigation of Fouling in Plate Heat Exchangers for Process Industries | 1441 |
| Kapustenko P. O., Tovazhnyansky L. L., Arsenyeva O. P., Yuzbashyan A. P. | >DOI: 10.3303/CET1229241 |
| Capital Cost Targeting of Total Site Heat Recovery | 1447 |
| Nemet A., Boldyryev S., Varbanov P. S., Kapustenko P. O., Klemeš J. J. | >DOI: 10.3303/CET1229242 |
| Ammonia Refrigeration Cycle Integration in Buildings Heating System | 1453 |
| Boldyryev S., Kapustenko P. O., Tovazhnyansky L. L., Garev A. O., Perevertaylenko O. Yu., Khavin G. L., Arsenyeva O. P., Klemeš J. J. | >DOI: 10.3303/CET1229243 |
| Effect of Turbulence Enhancement on Crude Oil Fouling in a Batch Stirred Cell | 1459 |
| Yang M., Wood Z., Rickard B., Crittenden B., Gough M. J., Droegemueller P., Higley T. | >DOI: 10.3303/CET1229244 |
| Robust Model Predictive Control of Heat Exchangers | 1465 |
| Bakošová M., Oravec J. | >DOI: 10.3303/CET1229245 |
| Information and Communication Technology (ict) and Its Contribution to Teaching and Learning in Chemical Engineering | 1471 |
| Perry S. J., Bulatov I. | >DOI: 10.3303/CET1229246 |
| Large Scale Capillary Based Plastic Heat Exchangers | 1477 |
| Raudenský M., Dohnal M. | >DOI: 10.3303/CET1229247 |
| Increasing Solar Energy Utilisation by Rescheduling operations with Heat and Electricity Demand | 1483 |
| Nemet A., Hegyháti M., Klemeš J. J., Friedler F. | >DOI: 10.3303/CET1229248 |
| Development and Evaluation of Enhanced Heat Transfer Tubes for Transitional Reynolds Number Flow | 1489 |
| Kukulka D. J., Smith R. | >DOI: 10.3303/CET1229249 |
| Optimization of Process Operation Strategies by Combining Process Models with Plant Operating Data | 1495 |
| Müller D., Höser S., Kahrs O., Arellano-Garcia H., Wozny G. | >DOI: 10.3303/CET1229250 |
| Modelling and Experiments for Application of Catalytic Distillation to Tame Synthesis | 1501 |
| Bonet-Ruiz A. E., Bonet-Ruiz J., Bozga G., Llorens J., Plesu V., Tuluc A., Bumbac G., Muscalu C. | >DOI: 10.3303/CET1229251 |
| Minimising Energy Use in Milk Powder Production Using Process Integration Techniques | 1507 |
| Atkins M. J., Walmsley M. R. W., Walmsley T., Fodor Z., Neale J. | >DOI: 10.3303/CET1229252 |
| CFD Analysis of a Cement Calciner for a Cleaner Cement Production | 1513 |
| Mikulcic H., Von Berg E., Vujanovic M., Priesching P., Tatschl R., Duic N. | >DOI: 10.3303/CET1229253 |
| Experimental Investigation of Adsorption of Heavy Metals (copper (ii)) from Industrial Wastewater with Synthetic Zeolite (4a) | 1519 |
| Dizadji N., Seyed Vossoughi S. S., Dehpouri S. | >DOI: 10.3303/CET1229254 |
| Solving a Separation-network Synthesis Problem by Interval Global Optimization Technique | 1525 |
| Szlama A. G., Kalauz K., Bertok B., Heckl I. | >DOI: 10.3303/CET1229255 |
| Planning Evacuation Routes with the P-graph Framework | 1531 |
| Garcia-Ojeda J. C., Bertok B., Friedler F. | >DOI: 10.3303/CET1229256 |
| Two-dimensional Modeling of a Packed-bed Membrane Reactor for the Oxidative Coupling of Methane | 1537 |
| Esche E., Arellano-Garcia H., Biegler L. T., Wozny G. | >DOI: 10.3303/CET1229257 |
| Evaluation of Sorbents at Elevated Temperatures for Downhole Application | 1543 |
| Pennewitz E., Kruspe T., Jung S., Schilling M. | >DOI: 10.3303/CET1229258 |
| Minimization of Energy Consumption for Chemicals Ultrapurification Processes | 1549 |
| Abejón R., Garea A., Irabien A. | >DOI: 10.3303/CET1229259 |
| Synthesis of Separation Process for Waste Treatment of Oil-in-water Emulsions | 1555 |
| Pecko Škof G., Novak Pintaric Z., Kravanja Z. | >DOI: 10.3303/CET1229260 |
| A New Cogeneration Targeting Procedure for Total Site | 1561 |
| Khoshgoftar Manesh M. H., Khamis Abadi S., Ghalami H., Amidpour M., Hamedi M. H. | >DOI: 10.3303/CET1229261 |
| Steady State Analysis and Optimization of a Continuous Reactor for Acid Pretreatment of Lignocellulosic Biomass | 1567 |
| López-Arenas T., Sales-Cruz M. | >DOI: 10.3303/CET1229262 |
| Steam Turbine Network Synthesis Using Total Site Analysis and Exergoeconomic Optimization | 1573 |
| Ghalami H., Khamis Abadi S., Khoshgoftar Manesh M. H., Sadi T., Amidpour M., Hamedi M. H. | >DOI: 10.3303/CET1229263 |
| Industrial Pasteurisation Process Improvement Possibilities | 1579 |
| Macut D., Filipan V. | >DOI: 10.3303/CET1229264 |
| Process Design and Optimization of Natural Gas liquefaction Processes | 1585 |
| Yoon S., Cho H., Lim D.-H., Kim J.-K. | >DOI: 10.3303/CET1229265 |
| Process Integration Study for the Use of Industrial Low Grade Heat | 1591 |
| Kwak D.-H., Oh S.-Y., Kim J.-K. | >DOI: 10.3303/CET1229266 |
| Web Technologies for Interactive Graphical E-learning Tools in Engineering Education | 1597 |
| Grigorov A., Angelov A., Detcheva E., Varbanov P. S. | >DOI: 10.3303/CET1229267 |
| Difficulty in Teaching in the Preparation of Design Process for Students of Chemical Engineering: a Case Study at the University of the State of Rio De Janeiro | 1603 |
| Figueiredo M. A. G., Figueiredo M. G. R. G. | >DOI: 10.3303/CET1229268 |
| Application of Advanced Estimation Techniques to a Chemical Plant Model | 1609 |
| Carinci P. S., Farina M., Manenti F., Scattolini R. | >DOI: 10.3303/CET1229269 |
| Structured Catalysts for Methane Auto-thermal Reforming in a Compact Thermal Integrated Atr Reformer | 1615 |
| Palma V., Ricca A., Ciambelli P. | >DOI: 10.3303/CET1229270 |
| Towards a Sustainable European Energy System – the Role of the Pulp and Paper Industry | 1621 |
| Berntsson T., Jönsson J. | >DOI: 10.3303/CET1229271 |
| The Multi-objective Optimization of an Actual Hydro Cracking Unit | 1627 |
| Vafajoo L., Kia M. | >DOI: 10.3303/CET1229272 |
| Emsys - Human Resources and Payroll Management Integrated Information System | 1633 |
| Iancu P., Adamescu D., Plesu V., Dinu G., Arsene C., Nicola S., Gorunescu L. E., Gheorghe C. N. | >DOI: 10.3303/CET1229273 |
| Electronic Document Management Information System for Universities | 1639 |
| Costoiu M., Plesu V., Isopescu R., Soriga S. G., Alesincu S. H., Arsene I. | >DOI: 10.3303/CET1229274 |